To replace the component, reverse the removal procedure.
Removing and replacing the power supply blank
Removing and replacing the power supply blank
WARNING: To reduce the risk of personal injury from hot surfaces, allow the power supply or power supply blank to
WARNING:
cool before touching it.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated
CAUTION:
with either a component or a blank.
Procedure
Procedure
1. Remove the power supply blank from the bay.
2. Immediately install the replacement power supply blank spare.
Removing and replacing drive blanks
Removing and replacing drive blanks
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated
CAUTION:
with either a component or a blank.
Procedure
Procedure
HPE ProLiant ML30 Gen10 Plus Server Maintenance and Service Guide
55