HP ProLiant ML30 Gen10 Plus Maintenance And Service Manual page 127

Item Item
1
2
3
4
5
1
Media 1 supports a SATA optical drive, SAS LTO drive, or a USB RDX docking station.
2
Media 2 supports a SATA optical drive or a USB RDX docking station.
Front panel LED and button Front panel LED and button
Item Item Description Description
1
1 Health LED
2 Power On/Standby button and
system power LED
1
When the two LEDs described in this table flash simultaneously, a power fault has occurred. For more information, see Front panel
LED power fault codes.
2
If the health LED indicates a degraded or critical state, review the system Integrated Management Log (IML) or use HPE iLO to
review the system health status.
3
Facility power is not present, power cord is not attached, no power supplies are installed, power supply failure has occurred, or the
Description Description
1
Media bay 1
2
Media bay 2
USB 3.2 Gen1 port
USB 2.0 port
8 SFF hot-plug drives
Status Status
Solid green
Flashing green
Flashing amber
Flashing red
Solid green
1
Flashing green
Solid amber
Off
Definition Definition
Normal
iLO is rebooting
2
System degraded
2
System critical
System on
Performing power-on sequence
System in standby
3
No power present
HPE ProLiant ML30 Gen10 Plus Server Maintenance and Service Guide 127