To replace the component, reverse the removal procedure.
Removing and replacing a hot-plug LFF SAS or SATA drive
Removing and replacing a hot-plug LFF SAS or SATA drive
CAUTION:
CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated
CAUTION:
with either a component or a blank.
Procedure
Procedure
1. Back up all server data on the drive.
2. Remove the front bezel .
3. Observe the drive LED status and determine if the drive can be removed.
4. Remove the drive.
HPE ProLiant ML30 Gen10 Plus Server Maintenance and Service Guide
43