Removing And Replacing An Optical Drive - HP ProLiant ML30 Gen10 Plus Maintenance And Service Manual

If the server is in rack mode, remove the server from the rack .
5. Remove the front bezel .
6. Remove the access panel .
7. Disconnect the power and USB cables.
8. Pull up and hold the release latch (callout 1), and then remove the RDX docking station (callout 2).
To replace the component, reverse the removal procedure.

Removing and replacing an optical drive

Removing and replacing an optical drive
HPE ProLiant ML30 Gen10 Plus Server Maintenance and Service Guide 59