Table of Contents
Advertisement
:
*
;
To stop RMS play
To check the programmed selections
Press the CHECK button on the remote commander. Each
time you press the CHECK button, the programmed
selections appear in the designated order.
To add a selection to the program
Once the RMS play starts, you cannot add a selection. To
add a selection, first stop the RMS play, and program new
selection(s) by following the procedure described on the
left column.
To delete the selection you programmed fast
Press the CLEAR button.
* RMS = Random Music Sensor
However, when checking the programmed selection, the
The RMS function allows you to program the desired
CLEAR button cannot be used.
selections in the desired order.
For the operation, program numbers must be written
To cancel the entire program
on the tape.
In the stop mode: Press the & button once.
This operation can be performed only with the
In the RMS play mode: Press the
button twice.
remote commander.
ot,
Designate the desired selection by pressing the
numeric button(s) during the stop mode.
The selection numbers can be specified from 1 to 99.
PGM NO.
AMS
|
Lights
2 Press the ENTER button.
STEP
Indicates the playing order.
| The RMS indicator lights
after programming the first
selection.
RMS
3
Repeat step 1 and 2.
A maximum of 60 selections can be programmed.
4
Press the B> (play) button.
The programmed selections are played back in the
designated order.
39
Advertisement
Table of Contents
