Table of Contents
Advertisement
Various Playback Operations
To listen to the beginning of a selection for more than
the designated time
Press the ®
(play) button while the selection you want to
listen to is played back.
While pressing the B> button, the countdown at the
MARGIN display stops, and the playback of that selection
continues.
To listen to an entire selection
Press the MUSIC SCAN button while the selection you want
to listen to is played back.
The music scan function is released, and the playback of
that selection continues.
When you press the MUSIC SCAN button during playback,
the tape is rewound to the beginning, and then the first part
of each selection (start ID position) is played back for the
time you designated sequentially.
Designating the Desired Selection
For this operation, the selections must be numbered
by the program numbers. The program numbers
are written at the same position as the start ID
codes. For how to write the program number, see
page 30.
1
During the desired program number with the
numeric button(s)*.
PGM NO,
6
9
| |
Current program
Designated program
number
number
38
2
Press B> (play).
The designated selection is searched for at high
speed and playback starts from the beginning of that
selection.
PGM NO
AMS
PGM NO
Displayed number is
advanced to the
designated number _J
L
Goes oft
one by one
* When you press the numeric button(s) during play-pause
mode, the deck enters the pause mode at the beginning
of the designated selection. Press the § PAUSE or >
button to resume playback.
if an incorrect number is designated
Before pressing the B> button. press the CLEAR button
The displayed program number will be cleared.
Then designate the correct program number
Once the B® button is pressed. it is impossible to cancel
the designated selection.
Skip Play
For this operation, the skip ID code(s) must be written on
the tape.
Press the SKIP PLAY button.
The SKIP PLAY indicator lights.
During playback, the tape skips to the next start ID position
automatically when a skip ID 1s detected, and the playback
resumes.
SKIP PLAY
PGM NO
8
Posie ii
Note
The skip play function operates only when a start ID exists
after the skip ID. If not. the unit will fast forward to the end
of the tape at 16 times the normal speed. then stop
To stop skip play
Press the 2 OPEN/CLOSE button to eject the cassette
Auto Play: Restarting Playback After Rewinding
While pressing 44 . press B>
The tape is rewound to the beginning, and playback starts
automatically.
Advertisement
Table of Contents
