Table of Contents
Advertisement
writing suo codes
S10] om Oxele(st>
In addition to the ordinary audio signals, various control
e When you record the tape with sub codes written onto a
codes called sub codes can be recorded on the DAT
new tape via digital-to-digital connection, the sub codes
cassette tapes to ease recording and reproducing
to be written on the new tape are following:
operation.
A desired selection can be called up or time information
Rta
The same as the codes written on
can be displayed using the sub codes, for example.
Sea
eerie
=" | the original tape
The sub codes such as start ID, program number, skip ID,
ict
a
end ID and program time, absolute time and date function
SiiniDs
~
The same as the codes written on
(recording the date) are available on this unit.
Cowpea ca der.
the original tape.
¢ Sub codes are written on the tape separately from the
rocram
audio signals, so the audio signals are not affected.
jumbe
to the DAT deck you use
The one written on the original tape
will not be written
When you use analog-to-analog connection. no sub codes
on the original tape will be written onto a new tape New
codes will be written according to the DAT deck you use
Start ID
This signal indicates the start of a music selection. You
| Selection |
can locate the position of the start ID precisely. This
yy
Y
ae.
signal should be written at the beginning of the selection.
i
Gy
ae =
Start ID
Program number
This signal gives a number to selection. You can record it
| Selection | Selection |
where the start ID is written. By designating this number.
yi
Vt
you can choose the desired selection directly or program
Uy)
ped
|
selections in a desired order.
Program number
Skip {0
This signal can be marked on the selection wherever you
wish. When the SKIP PLAY indicator is lit during
playback, the deck will skip at high speed from where the
skip ID is marked to the next start ID, and then playback
will start again. Record this skip ID at the beginning of
portion you want to skip.
Skip ID
Start !0
:
26
Advertisement
Table of Contents
