Epson Stylus Photo PX700FW Service Manual page 201

Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
Remove the screws (x10) that secure the Upper Housing.
4.
Upper Housing
Panel Unit
Figure 4-212. Removing the Upper Housing (2)
5. Open the Panel Unit, and lift the Panel Unit until the screw (x1) can be seen
from under the Right Hinge, and then remove the screw (x1).
Figure 4-213. Removing the Upper Housing (3)
DISASSEMBLY/ASSEMBLY
10
C.B.P. 3x10 (6±1Kgfcm)
C.B.A. 3x6 (black) (6±1Kgfcm)
C.B.S. 3x6 (8±1Kgfcm)
C.B.S. 3x8 (black) (8±1Kgfcm)
C.B.P. 3x10 (black) (6±1Kgfcm)
C.B.P. 3x12 (black) (6+1Kgfcm)
Right Hinge
Disassembly/reassembly procedures specific to Artisan 700/PX700W/TX700W
https://www.manualsbooks.com
Peel off the double-sided tape A that secures the Panel FFC to the Front
6.
Frame, and lift the Upper Housing until the Panel FFC becomes detached
from the FFC Holder. (See Fig.
Peel off the double-sided tape B that secures the Panel FFC to the Panel Unit.
7.
(See Fig. 4-214.)
Disconnect the Panel FFC from the connector on the Panel Unit, and remove
8.
the Upper Housing together with the Panel Unit.
Panel Unit
Double-sided tape B
Double-sided tape A
Upper Housing
FFC Holder
Figure 4-214. Removing the Upper Housing (4)
Remove the Panel Unit from the Upper Housing. (See
9.
(Artisan 700/PX700W/TX700W)
Tighten the screws in the order indicated in
Secure the Panel FFC with double-sided tape to the Front
Frame. (See Fig. 4-214.)
Secure the Panel FFC to the Panel Unit with double-sided tape.
Panel FFC
Figure 4-215. Installing the Upper Housing
Revision C
4-214.)
Front Double
Frame -sided
tape A
Panel FFC
Panel FFC
4.3.2.1 Panel Unit
(p194).)
Fig. 4-212.
Double-sided tape
Confidential
189