Epson Stylus Photo PX700FW Service Manual page 137

Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
Parts/Components need to be removed in advance:
ADF Unit (Artisan 800/PX800FW/TX800FW only)/Scanner Unit/Upper Left
Housing/Paper Guide Top Assy/Upper Housing
Removal procedure
Place the Carriage stopper jig on 80-digit side on the Paper Guide Front Assy.
1.
Turn the Spur Gear in the direction of the arrow, and release the Carriage
2.
Lock. (See Fig. 4-57.)
Move the Carriage Unit to the 80-digit side, and place it on the Carriage
3.
stopper jig.
Spur Gear
80-digit side
80-digit side
Paper Guide Front Assy
Carriage stopper jig
Figure 4-57. Releasing the Carriage lock and placing the Carriage stopper jig
DISASSEMBLY/ASSEMBLY
Carriage Unit
Carriage Lock is under
the Carriage Unit.
0-digit side
0-digit side
Carriage Lock
Disassembly Procedures
https://www.manualsbooks.com
When handling the Printhead, make sure not to touch or
damage the nozzle plate surface of the head. (See
Do not damage or contaminate the CR Seal, or touch it with
bare hands either. (See
Remove the screws (x4) that secure the Printhead and the Ink Supply Tube
4.
Assy, and detach the Printhead from the Carriage Unit.
Printhead
Figure 4-58. Removing the Printhead (1)
Disconnect the Head FFC (x2) from the Printhead.
5.
Head FFC
Figure 4-59. Removing the Printhead (2)
Revision C
Fig. 4-59.)
Fig. 4-62.)
Ink Supply Tube Assy
C.B.P. 2x10 (2.5Kgfcm)
Nozzle Plate
Printhead
125
Confidential