Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
Attach the Grounding Plate A between the Main Frame and
Base Frame. (See
Fig.
When installing the Grounding Plate B, attach the hook of it to
the hole of the Base Frame, and place it over the Main Frame.
(See
Fig.
4-106,
Fig.
Grounding Plate A
Figure 4-107. Attaching the Grounding Plate
Align the positioning holes (x6) of the Main Frame with the
dowels (x6) of the Base Frame. (See
Tighten the screws in the order shown in
For routing the cables, see
DISASSEMBLY/ASSEMBLY
4-106,
Fig.
4-107.)
4-107.)
Grounding Plate B
Hook and hole
Fig.
4-106)
Fig.
4-106.
4.4 "Routing FFC/cables"
(p202).
Disassembly Procedures
https://www.manualsbooks.com
When installing the Main Frame, be careful not to let it hit the
Base Frame. If the EJ Release Frame Assy L hits the Base
Frame (see
Fig.
4-113), the gear will come off, which may cause
the operation defect.
Do not let it hit here.
Figure 4-108. Installing the Main Frame
Tighten the screws in the order shown in
For routing the cables, see
After removing the Main Frame, make the specified adjustments.
� � � � �
� � � �
(See
Chapter 5
"ADJUSTMENT".)
�
� � � � �
� � �
Revision C
Base Frame
Fig.
4-106.
4.4 "Routing FFC/cables"
(p202).
Confidential
146