Epson Stylus Photo PX700FW Service Manual page 168

Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
Be careful not to touch the PF Scale with bare hands.
Be careful not to damage or contaminate the PF Scale.
Remove the E-ring and remove the PG Lever L.
12.
Left side
Figure 4-134. Removing the Carriage Unit (3)
Removing the Torsion Spring L. (See
13.
Remove the securing ring that secures the PG Cam L and remove the PG Cam
14.
L.
Left side
PG Cam L
Securing ring
Figure 4-135. Removing the Carriage Unit (4)
DISASSEMBLY/ASSEMBLY
PG Lever L
E-ring
Fig. 4-135.)
Torsion Spring L
Rib
Disassembly Procedures
https://www.manualsbooks.com
Be careful not to damage the Carriage Shaft with the Frame.
Move the Carriage Unit to the 80 digit side, and lift the Carriage Unit at the
15.
cutout of the CR Guide Plate, and remove the point A on the rear of the
Carriage Unit from the CR Guide Plate.
Side of the Carriage Unit
Point A
Figure 4-136. Removing the Carriage Unit (5)
Move the Carriage Unit to the center.
16.
CR Guide Plate
Figure 4-137. Removing the Carriage Unit (6)
Revision C
Carriage Unit
Cutout of the CR
Guide Plate
Carriage Shaft
Carriage Unit
156
Confidential