CHAPTER 3. Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь
отображаться.
3) Pull the lever of the board and pull out the target board slowly.
4) Align the new board to the guardrails of the slot, and slide the new board into the slot.
Push the front panel lever of the MP20/MP20S until it is completely inserted into the
OfficeServ 7200 main board port.
Mounting or Dismounting a Board
Before replacing a board which can be mounted or dismounted while the system
is operating, make sure to disconnect the cables connected at the front of the
system. Make sure to mount a new board into the slot 10 seconds after
dismounting the old one.
3-30
Figure 3.27 Removing Board
Figure 3.28 Replacing to New Board
© SAMSUNG Electronics Co., Ltd.