Pre-Check; Atmospheric Conditions; Starting The System - Samsung OfficeServ 7200 Installation Manual

CHAPTER 8.
This chapter describes items to check before starting the OfficeServ 7200, the procedure
for starting the system, and the procedure for testing whether the system is normally
operating after startup.

8.1 Pre-Check

This section describes items to check before starting the OfficeServ 7200.

8.1.1 Atmospheric Conditions


Temperature
Check if the temperature of the room where the system is installed is between 0°C and
45°C. If the room temperature is higher or lower than the normal operation
temperature, install a heating/cooling device to maintain normal temperature.

Humidity
Check if the humidity of the room where the system is installed is between 10% and
90%. Take special caution since humidity affects the electrical components and
connectors of the system.

Direct sunlight and dust
The room where the OfficeServ 7200 is installed should be protected from direct
sunlight and should have ventilation systems to prevent the system from
malfunctioning due to dusts.
© SAMSUNG Electronics Co., Ltd.

Starting the System

OfficeServ 7200 Installation Manual
8-1