Load Configuration Operation
Limitations on Load Configuration
A.3
Limitations on Load Configuration
In this section:
A.3.1
Fabric and Port-Connection
A.3.2
SNMPv3
A.3.3
Fujitsu Optical Interfaces
A.3.4
RollBack
A.3.5
Load Configuration with Large Database
A.3.6
LLDP
A.3.1
Fabric and Port-Connection
Different Configuration File from Running Database
If the running configuration consists of fabric and port connections and the configuration is different from the
configuration file, the user needs to delete all fabric- and port-connection entities from the database first and
execute the load replace operation.
Running Config:
Fabric X
Port-Connection A
Shelf 1
Fabric Y
Port-Connection B
Shelf 3
Config File:
Fabric X
Port-Connection A
Shelf 1
Figure 187
Restoring Configuration
In the preceding figure, the user restores the configuration file onto the system. The user needs to delete fabric
X, fabric Y, port-connection A, and port-connection B before executing the load replace operation.
·
Release 19.1.1
Issue 1.1, May 2021
Shelf 2
Shelf 4
Shelf 2
454
Fujitsu and Fujitsu Customer Use Only