Proxy Arp; Scripting Automation-Python; Secure Copy - Fujitsu 1FINITY L100 User Manual

System Description and Engineering
System Features
1.4.4

Proxy ARP

Proxy Address Resolution Protocol (Proxy-ARP) is enabled on a Gateway Network Element (GNE). The GNE serves
as a proxy for IPv4 communication between remote subtended nodes and a DCN router. When enabled, the GNE
uses its Ethernet address in all management frames and allows NEs to be managed remotely by forwarding
management frames between itself and the DCN. The GNE and the subtended nodes must be on the same IPv4
subnet connected through an embedded data communications channel, for example, OSC. The GNE is
provisioned with a default or static route and OSPF is enabled on all embedded communication channels with
static route distribution enabled.
1.4.5
Scripting Automation—
Python
The scripting automation feature allows Level-4 users to run their own Python scripts to simplify system
administration tasks. The Python scripts can provision and monitor a device using the Python CLI library.
Scripts can be executed in four ways:
On Demand
Bootup
Periodic
Event
Bootup, Periodic, and Event scripts require the provisioning of a Bootup profile, a Periodic profile, and an Event
profile, respectively. An On Demand script does not require provisioning.
Note: For more detailed scripting automation information, refer to Scripting Automation Guide, available on the
Fujitsu Partners website, https://partners.fnc.fujitsu.com/documentation.
1.4.6

Secure Copy

Secure Copy (SCP) is a command line utility that is used to securely copy files and directories between a local
machine and a remote NE over an SSH connection. This utility is included in most Linux ® and UNIX ®
environments. When transferring data with SCP, both the files and passwords are encrypted.
The following commands are used for SCP file transfer. The user can execute the commands through the bash
shell started from CLI or through shell on the CONSOLE port.
Command (Send File):
scp <SourceFile> <user>@<host>:<directory>/<TargetFile>
·
Release 19.1.1 Issue 1.1, May 2021
Immediately, through CLI
Upon start-up
At specified times/dates
When an alarm is raised/cleared or an event notification occurs
43
Fujitsu and Fujitsu Customer Use Only