Fujitsu 1FINITY L100 User Manual page 405

System Maintenance
Equipment Replacement
Figure 159
Locked Position
Warning: The blade is heavy; always use two hands and be prepared to support the entire weight of the
blade after releasing the blade from the locked position.
Step 8
Find the locking tabs on each side of the blade.
Step 9
With the blade at the locked position, place one hand on each side of the blade.
Step 10
Press both locking tabs UP and slowly pull the blade to release. Continue pulling blade until fully removed from
the Housing.
·
Release 19.1.1 Issue 1.1, May 2021
405
Fujitsu and Fujitsu Customer Use Only