Installation - Siemens SINAMICS S120 Manual

9.10.6

Installation

①
Figure 9-45
Installation
1. Place the drilling pattern on the mounting surface. Make sure that the contact surface is bare,
unpainted metal.
2. Drill two holes with Ø 5.3 or M5 threaded holes according to the drilling pattern.
3. Fix the Sensor Module to the mounting surface. The tightening torque is 6 Nm (53.1 lbf in).
Control Units and additional system components
Equipment Manual, 06/2020, 6SL3097-5AH00-0BP2
50 (1.96)
Contact surface
Hole drilling pattern for installation
Encoder system connection
9.10 Sensor Module External SME120
50 (1.96)
1
Ø5,3 (0.21)
(0.39)
20
M5 / 6 Nm
(0.78)
Ø5,3 (0.21)
M5 / 6 Nm
20
(0.78)
10
297