Installation; Protective Conductor Connection And Shield Support - Siemens SINAMICS S120 Manual
Hide thumbs
Also See for SINAMICS S120:
- Function manual (1094 pages) ,
- Diagnostic manual (947 pages) ,
- Manual (848 pages)
Table of Contents
Advertisement
6.5.6
Installation
Installation
1. Tilt the component backwards slightly and attach it to the DIN rail using the hooks.
2. Swivel the component onto the DIN rail until you hear the mounting slide at the rear latch
into position.
3. Slide the component along the mounting rail to either the left or the right into its final
position.
Removal
1. First shift the mounting slide downwards at the lug to release the interlocking with the
mounting rail.
2. Swivel the component to the front and withdraw it upwards from the DIN rail.
Figure 6-16
6.5.7
Protective conductor connection and shield support
It is always advisable to shield the digital input/output wiring.
Control Units and additional system components
Equipment Manual, 06/2020, 6SL3097-5AH00-0BP2
①
Mounting slide
②
Mounting rail
Removing from a DIN mounting rail
Terminal Modules
6.5 Terminal Module TM41
155
Advertisement
Table of Contents
