Configure Cameras - Motorola HMEZ2000 User Manual

Configure Cameras

The camera properties panel gives you control over camera properties (settings) such as:
• camera name
• motion sensor quiet period
• length of video clip to capture
• picture brightness, contrast, quality
• picture caption
39
To display the camera properties panel:
1. Click on the Config icon
2. You can use the camera properties panel to change one or more settings for a specific camera, or revert to
default settings. Changed camera settings will take effect after you click the OK button. To close the camera
properties panel without making any changes, click on the CANCEL button. To return all settings to default
values, click on the DEFAULT button.
3. After you click the OK button, a confirmation message (or an error message) will be displayed. Click OK to
dismiss the message. The camera properties panel will remain open so that you can make further changes.
(located at the right of each camera entry in the Device Overview device list).
Motorola homesight™ USER GUIDE