Motorola HMEZ2000 User Manual page 121

mode, the sensor will immediately wake up and report a status change whenever a change is detected. The default power mode is Normal. Click on
the down arrow and select from the list.
OK
• Changes that have been made to settings are applied to the sensor. A confirmation (or error) message will pop up. The panel will remain open.
CANCEL
• Closes the sensor properties panel. Any changes that have been made to settings without clicking on OK are discarded.
DEFAULT
• Resets all sensor properties to default values (including sensor name).
Related Topics
Device Discovery
Event Scheduling
Event Archives
Event Logs
Arming Methods
System Controls
114 Motorola homesight™ USER GUIDE