Comparison Table Of Regenerative Option Combinations - Mitsubishi Electric MELSERVO-J2S Series Transition Handbook

Part 9: Review on Replacement of Optional Peripheral Equipment
Part 9: Review on Replacement of Optional Peripheral Equipment

1. COMPARISON TABLE OF REGENERATIVE OPTION COMBINATIONS

POINT
The MR-J4 series provides the new regenerative options shown in the table
below.
When an MR-J2S series regenerative resistor is used as it is with a servo motor
combined, an alarm may occur. Be sure to use the regenerative resistor in the
combination specified for the MR-J4 series.
Do not use regenerative options newly provided by the MR-J4 series with the
MR-J2S series because use of them causes an amplifier malfunction.
Model
MR-J4-350_(-RJ)
MR-J4-500_(-RJ)
MR-J4-11K_(-RJ)
MR-J4-15K_(-RJ)
MR-J4-22K_(-RJ)
MR-J4-60_4(-RJ)
MR-J4-100_4(-RJ)
MR-J4-200_4(-RJ)
MR-J4-500_4(-RJ)
MR-J4-700_4(-RJ)
MR-J4-11K_4(-RJ)
MR-J4-15K_4(-RJ)
List of new regenerative options
Regenerative option MR-RB
3N 5N
31 51
5R
9F
9T
1H-4 3M-4
1H-4
3G-4 5G-4
34-4 54-4
3U-4 5U-4
5K-4
6K-4
9 - 2
Accessory regenerative
resistor
GRZG400-0.8Ω × 4
GRZG400-0.6Ω × 5
GRZG400-0.5Ω × 5
GRZG400-2.5Ω × 4
GRZG400-2Ω × 5