Flash Off Time; Green Spot Duration - HP Linear Barcode Scanner II Programming Reference Manual

Enter/Exit Programming Mode

Flash Off Time

This feature specifies the OFF time for the indicator LED while in Flash Mode.
The selectable range is 100 to 9,900 milliseconds (0.1 to 9.9 seconds), in 100
millisecond increments. See
programming instructions.
Select Flash OFF Time Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.

Green Spot Duration

Specifies the duration of the good read pointer beam after a good read.
$CLSSP01
Green Spot Duration = Short (300 msec)
$CLSSP03
Green Spot Duration = Long (800 msec)
64
$CSNFF
06 = Flash is OFF for 600ms
DEFAULT


"Flash Off Time" on page 255 for more detailed
Green Spot Duration = Disable (Green Spot is Off)
DEFAULT
Green Spot Duration = Medium (500 msec)
Green Spot Duration
~
CANCEL
$CLSSP00 
$CLSSP02 
Programming Reference Guide