Code 39 Set Length 2 - HP Linear Barcode Scanner II Programming Reference Manual

Enter/Exit Programming Mode

Code 39 Set Length 2

This feature specifies one of the bar code lengths for
on page
page 116
Mode. Length includes the bar code's check, data, and full-ASCII shift charac-
ters. The length does not include start/stop characters.
The length can be set from 1 to 50 characters. A setting of 00 specifies to
ignore this length (only one fixed length). See
more detailed programming instructions.
Select Code 39Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
118
116. Length 2 is the maximum label length if in
Mode, or the second fixed length if in
$CC3L2
50 = Length 2 is 50 Characters
DEFAULT
Code 39 Length Control
Variable Length on
Fixed Length on page 116
"Set Length 2" on page 258 for
~
CANCEL
Programming Reference Guide
Code 39