Character Conversion - HP Linear Barcode Scanner II Programming Reference Manual

Enter/Exit Programming Mode

Character Conversion

Character conversion is an eight byte configuration item. The eight bytes are 4
character pairs represented in hexadecimal ASCII values. The first character in
the pair is the character that will be converted. The second character in the pair
is the character to convert to. If the character to convert in a pair is FF, then no
conversion is done. See
programming instructions.
48
"Character Conversion"
0xFFFFFFFFFFFFFFFF
DEFAULT
(No character conversion)
Character Conversion
on page 248 for more detailed
$CLFCH
Configure Character Conversion
Programming Reference Guide