Stand Detection - HP Linear Barcode Scanner II Programming Reference Manual

Reading Parameters
Stand Mode Triggered Timeout (continued)
$CSNOT10
Stand Mode Triggered Timeout = 8 Seconds

Stand Detection

Specifies the behavior of the scanner when placed in a stand that contains
autorecognition hardware.
Switch to Stand Mode
Switch to Flashing
Programming Reference Guide
Enter/Exit Programming Mode
$CSNOT0C
Stand Mode Triggered Timeout = 6 Seconds
$CSNOT00
Stand Mode Triggered Timeout = Switch back to Trigger Single on
trigger pull
Ignore Autorecognition
DEFAULT
Switch to Always On
61