Codablock F Set Length 2 - HP Linear Barcode Scanner II Programming Reference Manual

Enter/Exit Programming Mode

Codablock F Set Length 2

This feature specifies one of the bar code lengths for
trol on page
page 208
Mode. Length includes the bar code's check, data, and full-ASCII shift charac-
ters. The length does not include start/stop characters.
The length can be set from 3 to 255 characters. A setting of 00 specifies to
ignore this length (only one fixed length). See
more detailed programming instructions.
Select Codablock F Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
DEFAULT
210
208. Length 2 is the maximum label length if in
Mode, or the second fixed length if in
$CCFL2
100 = Length 2 is 100 Characters
Codablock F Length Con-
Variable Length on
Fixed Length on page 208
"Set Length 2" on page 258 for
~
CANCEL
Programming Reference Guide
Codablock F