USB-COM (RS-232 Simulated) Interface
Indicate Transmission Failure
This option enables/disables the reader's ability to sound an error beep to indi-
cate a transmission failure while in ACK/NAK mode.
$CR2TF01
Indicate Transmission Failure = Enable Indication
Disable Character
Specifies the value of the RS-232 host command used to disable the reader.
ASCII characters or any hex value from 0 to 0xFF can be selected. See
Character"
$CR2DC
Select Disable Character Setting
Programming Reference Guide
on page 237 for more detailed programming instructions.
0x44 = Disable Character is 'D'
DEFAULT
Enter/Exit Programming Mode
$CR2TF00
Indicate Transmission Failure = Disable Indication
DEFAULT
"Disable
21