Configuring the System Printer for PV4062/PV4062.F
This appendix describes how to change the conguration of the system printer to print the
test results by using the VIEW RESULT function.
The HP 4062UX/F environment allows three types of printers: local by HP BASIC/UX
(series 300 only), spooled by HP-UX , and remote by SRM (series 300 only). Before using
your desired printer, you must set the proper conguration information as described in this
appendix. To establish print environments, refer to the HP BASIC documentation.
You may also modify page formatting items (page length, margins, and page numbering
ON/OFF) by using the VIEW RESULT function.
Figure B-1 shows the PV4062/PV4062.F printer conguration page. To display this page,
load and run the PV4062/PV4062.F program, select the
softkey, enter the name of the le that contains the test results, then select the
NNNNNNNNNNNNNNNNNNNNNNNNNNNNN
READ FILE
softkey.
NNNNNNNNNNNNNNNNNNNNNNN
PRINTER
d
********** CONFIGURATION **********
PRINTER TYPE
SPOOL COMMAND = | lp
PAGE LENGTH
MARGIN
PAGE NUMBERING = ON
Select desired softkey
NNNNNNNNNNNNNNNNN
NNNNNNNNNNNNNNNNN
PRINT
c
= HP-UX SPOOL
= 66
: TOP = 2
BOTTOM = 2
NNNNNNNNNNNNNNNNN
NNNNNNNNNNNNNNNNNNNNNNNNNN
RECONFIG
Figure B-1. An Example of the Printer Configuration Page
Configuring the System Printer for PV4062/PV4062.F B-1
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
VIEW RESULT
LEFT = 0
NNNNNNNNNNNNNNNNN
NNNNNNNNNNNNNNNNN
NNNNNNNNNNNNNNNNN
B
softkey, select the
NNNNNNNNNNNNNNNNN
EXIT
a
b