Table of Contents
Advertisement
Installation Guidelines
Safety instructions
The module shall be installed in the interior of a street legal passenger vehicle with a rated voltage of 12V.
The module shall be installed in a way such that the inlets and outlet are not obstructed/covered.
Only connecting cables included with this device and wiring methods called out in this manual may be used. The
2A fuse integrated into the provided power harness must be in place during installation and device
lifetime in the vehicle. Compliance with the applicable standards can no longer be guaranteed if the device is
modified without the agreement of Robert Bosch GmbH.
Care must be taken to make sure that power for this device is not pulled from safety-related vehicle functions,
such as: airbags, anti-lock brake systems, traction control, and collision prevention systems.
Do not install the device at temperatures below 10°C (50°F) or above 60°C (140°F). If the outside temperature is
below 10°C, please turn the vehicle on with heat=ON for several minutes until the interior of the vehicle reaches
10°C or above. Once the vehicle interior is within the specified temperature range, it is safe to mount the device.
Avoid installing the device in humid or dusty locations.
The windshield contact surface for the device must be clean and dry during installation to ensure proper
bonding. This includes being free of condensation.
7
Cross-Domain Computing Solutions | 2022-01-27
© Robert Bosch GmbH 2021. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Advertisement
Table of Contents
