Duties Of The Authorized Inspector - Siemens LMV50 Series Manual

In addition with
LMV52
225/327
Building Technologies

14 Duties of the authorized inspector

Prior to approval, the manufacturer must state the assigned DIN registration number
and product ID number, confirming that the LMV5 complies with the type-tested
system.
Also, only the components specified for use with the LMV5 (AZL5, actuating devices,
flame detectors, transformer, and CAN bus cable) may be used and, in addition with
the LMV52, the PLL52 and the QGO20 In the case of VSD operation, we recommend
to use the AGG5.310 accessory set for acquiring the fan speed.
Flame detectors QRA
Flame detectors QRB
Flame detectors QRI
Actuators SQM4
Actuators SQM9
Operating and display unit AZL5
Transformer AGG5
CAN bus connecting cable AGG5.63
Accessory set AGG5.310 for acquiring
the fan speed
(recommended, if required)
O2 module PLL52
O2 sensor QGO20
Flue gas collector AGO20
Accessory set AGG5.310 for
acquiring the fan speed
(recommended)
The mechanical links between the actuators and the fuel and air actuating devices and
any other actuating devices used must be rigid.
In addition, following must be checked:
Basic Documentation LMV5...
14 Duties of the authorized inspector
refer to Data Sheet N7712
refer to Data Sheet N7714
refer to Data Sheet N7719
refer to Data Sheet N7814
refer to Data Sheet N7818
refer to User Documentation A7550
refer to Basic Documentation P7550
refer to Basic Documentation P7550
refer to Basic Documentation P7550
refer to Basic Documentation P7550
refer to Data Sheet N7842
refer to Data Sheet N7842
refer to Basic Documentation P7550
CC1P7550en
22.05.2018