Siemens LMV50 Series Manual page 170

8. Setting the load
controller (option)
Menu level 1 Menu level 2
Params & Display
LoadController
9. Selecting a
temperature or pressure
sensor
Menu level 1 Menu level 2
Params & Display
LoadController
170/327
Building Technologies
Menu level 3
Configuration
Select a load controller operating mode in accordance with the examples given in
chapter Operating modes with load controller ON.
This configures the output signal for the VSD (refer to chapter Configuring the current
interface).
If the internal load controller of the LMV5 is used, a temperature or pressure sensor
must be connected to input 1, 2 or 4.
Menu level 3
Configuration
On the configuration level of the load controller, select the required type of sensor.
Then, define the sensor's measuring range.
Basic Documentation LMV5...
9 Commissioning instructions for the LMV5
Menu level 4 Menu level 5
LC_OptgMode
Menu level 4 Menu level 5
SensorSelect
MeasureRange PtNi
Ext Input X61 U/I
MRange TempSens
MeasureRange
PressSens
Ext MinSetpoint
Ext MaxSetpoint
Menu level 6
Menu level 6
CC1P7550en
22.05.2018