Designations; Safety Instructions; About This Section; Intended Use - Bosch rexroth PE 2/X Assembly Instructions Manual

1.3.3

Designations

This document uses the following designations:
Table 4: Designations
Designation Meaning
PE 2/X, PE 2/H Positioning unit from the Rexroth transfer system TS 2plus
PE 4 Positioning unit from the Rexroth transfer system TS 4plus
WT 2, WT 2/H Workpiece pallet from the Rexroth transfer system TS 2plus
WT 4 Workpiece pallet from the Rexroth transfer system TS 4plus
Size Size

2 Safety instructions

2.1 About this section

This product has been manufactured to be state-of-the-art. Nevertheless, there is
a risk of personal injury and property damage if you do not read this section and
follow the safety instructions in this document.

Read this documentation carefully and completely before you start working with
the product.

Keep these instructions accessible to all users at all times.

Always include them when giving the product to a third party.

2.2 Intended use

The product is an incomplete machine.
You may use the product as follows:
• for installation in a Rexroth transfer system TS 2plus
• for positioning the Rexroth workpiece carriers WT 2, WT 2/H, WT 4
• Maximum load/section load: see the Technical Data on page 36.
• For the environmental conditions, see page 37.
The product is intended only for commercial use and not for private use.
The intended use also implies that you have read all this documentation and fully
understood it, in particular chapter 2 "Safety instructions".

2.3 Improper use

Any use other than that described in the section "Intended use" is considered
improper and is not permitted.
Bosch Rexroth AG is not liable for any loss or damage resulting from improper use.
The user alone bears any risks associated with improper use.
The following foreseeable misuses also constitute improper use:
• Transporting goods other than those specifi ed.
• Using the product without a case or other, customer-supplied guard.
3 842 564 350/2020-06, MIT: PE 2/X, PE 2/H, PE 4, Bosch Rexroth AG
Safety instructions 7/40