Spare Parts; Decommissioning; Disassembly And Replacement - Bosch rexroth PE 2/X Assembly Instructions Manual

34/40

Decommissioning

Bosch Rexroth AG, MIT: PE 2/X, PE 2/H, PE 4, 3 842 564 350/2020-06

10.5 Spare parts

For a list of spare parts, see
www.boschrexroth.com/mtpro
11 Decommissioning
This product does not need to be decommissioned. Accordingly, this section has
been left blank.

12 Disassembly and replacement

High pneumatic pressure!
Risk of serious injury to eyes and body parts from whipping hoses and sudden
compressed air release.

Switch off the compressed air supply to the relevant system component before
performing any maintenance or repairs.

Ventilate the pneumatic circuit of the relevant system component.

Secure the system against being unintentionally switched on again.

Wear safety goggles.
Falling and toppling loads!

Only qualifi ed personnel should transport the product.

Never stand or walk under suspended loads.

Make sure no one is in the danger zone.

Only use suitable and inspected lifting gear, slings and forklifts.

Observe bearing load; for product weight, see shipping documents.

Check that the slings are securely fastened.

Secure the load against toppling before you lift it.
, 3 842 539 057.
MTpro
WARNING