Download; Starting The Module - Toshiba FL654A User Manual

8.2.7 Download

Download the I/O configuration information using nV-Tool. There are the following two methods for
downloading I/O configuration information.
(1) Local connection
Directly connect nV-Tool to the TOOL connection connector in the FL654A that is the target for

download.

(2) Remote connection
Connect nV-Tool to the TOOL connection connector of an FL654A that is not the target for
download. (For remote connection, set the timeout time of the transmission parameter setting
to 10 seconds or more.)

8.2.8 Starting the Module

(1) DIP switch setting
Set the operation setting switch of the FL654A so that SW3 is ON and SW4 is OFF.
(2) Set the RUN/HALT switch to RUN.
(3) Turn ON the power.
Unified Controller nv Series FL-net Remote I/O Station Module FL654A User's Manual
8.2 Remote I/O Startup Procedure
8
69