Gasket
Arm cover 2
Apply the liquid gasket
throughout this surface.
When mounting the cover, apply the liquid gasket to the area shown in Fig. 5.6 above.
After mounting the arm cover 1, coat the liquid gasket to fill the gap with the arm 1.
Also, apply the Loctite adhesives to all set bolts.
•
Be sure to attach the gasket and apply the liquid gasket. Also, be sure to
coat the Loctite adhesives to all set bolts. Otherwise, the dust- and
drip-proof performance is damaged to cause entry of water or dust.
DUST- & DRIP-PROOF TYPE SPECIFICATIONS MANUAL
Apply the liquid gasket to the surface
for setting the arm 1 (rear side).
Fig. 5.6 Arm 1 covers
!
CAUTION
– 45 –
Arm cover 1
Gasket
Arm 1
Apply the liquid gasket throughout the gap
between the arm cover 1 and arm 1.
STE 80765