Toshiba TH850A Instruction Manual page 41

Cap
When mounting, apply
the liquid gasket to this
area.
Gasket
Glued to the upper
keep plate.
Upper keep plate
Set screw
Wiring guide
When mounting, apply
the liquid gasket to
these areas.
Bellows set ring
Need not be removed.
5) To mount the bellows, observe the above steps in the reversed order.
Be sure to attach the gasket, and apply the Loctite adhesives to all set bolts.
• When dismantling the bellows, DO NOT pull it out by force. Otherwise, the
bellows may rupture.
• Be sure to apply the Loctite adhesives to all set bolts. Otherwise, the dust-
and drip-proof performance is damaged to cause entry of water or dust.
• Be sure to attach the gasket. Otherwise, the dust- and drip-proof
performance is damaged to cause entry of water or dust.
DUST- & DRIP-PROOF TYPE SPECIFICATIONS MANUAL
Bearing case
Fig. 5.3 Upper bellows
!
CAUTION
– 41 –
Bellows
Lower keep plate
Gasket
Glued to the
bearing case.
Gasket
Glued to the
bellows set ring.
Need not be
removed.
Arm 2 cover
Shaft for
bellows
Set screw
Collar
Z170:
Provided
Z340:
Not provided
STE 80765