Table of Contents
Advertisement
34/81
Bosch Rexroth AG
Connections
7.2.5
Parallel Interface XLPT1
XLPT1 – Parallel interface for print‐
er, scanner, etc.
adjust the values of the COM interfaces in the BIOS. Alternatively, the IRQ can
also be adjusted via the configuration software of the serial device.
BIOS setting since Q1/2007
Menu: I/O Device Configuration
Serial port C (COM
[Enabled]
3):
Base I/O address:
[3E8]
Interrupt:
[IRQ 10]
Serial port D (COM
[Enabled]
4):
Base I/O address:
[2E8]
Interrupt:
[IRQ 11]
Fig.7-6:
BIOS settings of the COM interfaces
For any questions, please contact your service/sales person or the help desk
+49 (0) 9352 / 40 50 60, see also
77.
D-Sub female connector, 25-pin
Type:
Cable length:
Cable type:
Interrupt (IRQ):
I/O address:
Fig.7-7:
Parallel interface - XLPT1
DOK-SUPPL*-VPB*40.1***-PR02-EN-P
Rexroth IndraControl VPB 40.1 Control Cabinet PC
BIOS setting until Q1/2007
Menu: Integrated Peripherals
Onboard Serial Port
3:
Onboard Serial Port
4:
chapter 12 "Service and Support" on page
SPP (ex works), EPP, ECP
3 m max.
Shielded, cross-section min. 0.14 mm
7
378H
[3E8/IRQ11]
[2E8/IRQ10]
2
Advertisement
Table of Contents
