Table of Contents
Advertisement
DOK-SUPPL*-VPB*40.1***-PR02-EN-P
Rexroth IndraControl VPB 40.1 Control Cabinet PC
6
Display and Operating Components
6.1
Monitor and Keyboard
Displays with foil keyboard and
touch screen
Connection monitor
6.2
Operating and Error Display
LEDs for operating and error dis‐
To display and operate the VPB 40.1 we recommend the displays VDP 16,
VDP 40 and VDP 60 especially designed by Bosch Rexroth for industrial ap‐
plications. The displays are connected with the VPB 40.1 via the G5 display
interface. These displays are equipped either with a keypad or with a touch
screen with varying display size.
For detailed information, please refer to the relevant documenta‐
tion.
A standard monitor (female connector XVGA), a PS2 keyboard (female con‐
nector XKeyb.) and a PS2 mouse (female connector XMouse) can be also
connected with the VPB 40.1. Please observe that most of the standard mice
and keyboards are not suitable for the industrial environment and are very sus‐
ceptible to electromagnetic disturbances.
NOTICE
If a VDP is used, keyboard and mouse may only be connected to this display.
Don't use the keyboard and mouse interfaces at the VPB 40.1.
In the lower right part of the connector panel there are five LEDs to display the
device states and errors. Apply the specified measure if one of the following
LEDs display either an error or a note.
play
LED
Display
Vi
LED green Normal mode
LED off
Vo
LED green Normal mode
LED off
T
LED off
LED flash‐
es yellow
Display and Operating Components
The VPB 40.1 control cabinet PC cannot be
operated if keyboard and mouse are connec‐
ted to the VPB 40.1 if a VDP display is used.
Meaning
No supply voltage AC 230 V/115 V
or DC 24 V
Internal 5 V supply faulty!
Normal mode
Overtemperature
Bosch Rexroth AG
29/81
Measure
-
Check the supply voltage
at the power supply unit!
-
-
Reduce surrounding air
temperature!
Check fan on the control
cabinet PC!
Advertisement
Table of Contents
