Table of Contents
Advertisement
Warning and Safety instructions
Technical safety
The refrigerant circuit has been checked for leaks. The wine
conditioning unit complies with statutory safety requirements and
the appropriate EU directives.
This wine conditioning unit contains the coolant Isobutane
(R600a), a natural gas which is environmentally friendly. The coolant
does not damage the ozone layer and does not contribute to the
greenhouse effect.
The use of this coolant has, however, led to a slight increase in the
noise level of the appliance. In addition to the noise of the
compressor, you might be able to hear the coolant flowing around
the cooling circuit. Unfortunately, this cannot be avoided, but it does
not affect the performance of the wine conditioning unit.
When transporting and installing the wine conditioning unit, ensure
that no parts of the cooling circuit are damaged. Splashes of coolant
can damage the eyes.
In the event of damage:
- Avoid naked flames or anything which creates a spark.
- Disconnect the wine conditioning unit from the mains electricity
supply.
- Ventilate the room where the wine conditioning unit is located for
several minutes.
- Contact your Miele Dealer.
The more coolant there is in a wine conditioning unit, the larger
the room it should be installed in. In the event of a leakage, if the
appliance is in a small room, there is the danger of combustible
gases building up. For every 11 g of coolant at least 1 m
space is required. The amount of coolant in the appliance is stated
on the data plate inside the wine conditioning unit.
8
3
of room
Advertisement
Table of Contents
