Table of Contents
Advertisement
Information for dealers
Demo mode
The wine conditioning unit can be
demonstrated in the showroom or at
exhibitions in "Demo mode". In this
mode the control panel and interior
lighting are active but the compressor
remains switched off, so that the
appliance does not cool down.
Switching on demo mode
Switch the wine conditioning unit off
by touching the On/Off sensor.
The temperature display will go out and
the mains connection symbol will
appear.
Place your finger on the sensor,
and leave it there.
At the same time, briefly touch the
On/Off sensor (without letting go of
the sensor).
50
Leave your finger on the sensor
until the symbol appears in the
display.
Then release the sensor.
Demo mode is activated and the
symbol appears in the display.
Switching off Demo mode
The symbol is lit up in the display.
Touch the settings sensor.
All symbols available for selection will
appear in the display and the symbol
flashes.
Touch the sensors for setting the
temperature ( or ) repeatedly until
the symbol flashes.
Touch the OK sensor to confirm your
selection.
1 flashes in the display (means: Demo
mode is switched on) and the symbol
lights up.
Advertisement
Table of Contents
