Table of Contents
Advertisement
Switching on and off
As soon as the set temperature has
been reached, the sensor for the
respective wine conditioning zone will
light up constantly. The alarm symbol
will go out as soon as the set
temperatures have been reached in
each zone.
The interior lighting will come on when
the door is opened.
Settings
A different setting can be set for each
zone.
Touch the sensor for the wine
conditioning zone you want to adjust
the settings for.
The sensor that has been selected is
highlighted in yellow.
- You can now set the temperature,
and
- switch on the DynaCool function.
Tip: Please refer to the relevant section
for more information.
If you then select a different wine
conditioning zone, the settings for the
previously selected zone will remain
unchanged.
20
Switching off
Touch the On/Off sensor.
If this does not work, the safety lock
is still activated.
The sensors for the two wine
conditioning zones will then go out.
The temperature display will go out and
the mains connection symbol will
appear.
The interior lighting will go out and the
cooling process will be switched off.
Switching off for longer
periods of time
If the wine unit is not going to be used
for a longer period of time:
Switch the wine unit off.
Switch off at the wall and withdraw
the plug from the socket, or
disconnect the fuse.
Clean the wine unit.
Leave the door ajar to air the wine
unit and avoid odours building up
inside it.
If the wine unit is switched off, but
not cleaned, during a long absence
and the door is left shut, there is a
risk of mould building up inside the
appliance.
The wine unit must be cleaned.
Advertisement
Table of Contents
