Table of Contents
Advertisement
The interior lighting can be set to
remain on when the door is closed so
your wines can be on display at all
times.
Each wine conditioning zone has its
own lighting strip so that all zones are
illuminated.
Thanks to the use of LED lighting, the
wine will not be adversely affected by
heat or UV light.
Switching the feature lighting
on and off
Touch the On/Off sensor for the
feature lighting so that it is
highlighted in yellow.
The interior lighting is now switched on,
even when the appliance door is
closed.
To switch the feature lighting off
again:
Touch the On/Off sensor for the
feature lighting so that it is no longer
highlighted in yellow.
The interior lighting is now switched off
when the appliance door is closed.
Feature lighting
Setting the brightness of the feature
lighting
The brightness of the feature lighting
can be adjusted.
Touch the On/Off sensor for the
feature lighting so that it is
highlighted in yellow.
Touch the sensor for the feature
lighting again for approximately four
seconds until flashes in the display
(after two seconds will flash).
Use the sensors for altering the
temperature to set the feature lighting
brightness ( and ). To do this,
touch and hold the sensors. The
brightness is adjusted directly and is
infinitely variable. The results are not
visible in the display.
By touching the sensor
- the lighting becomes dimmer
- the lighting becomes brighter.
31
Advertisement
Table of Contents
