Use this device to function as an access point
Set this device to function as an access point for other computers.
To use this device as an access point
1
Select
area on the lower right desktop screen.
The wireless LAN turns on and the WLAN (wireless LAN) lamp turns green.
Or, If the icon is not displayed in the communication area, click Windows
Start, point to
Marvell
•
From the Operation Mode screen, select Station Mode and make sure the
Radio Off check box is unchecked. Proceed to Step 4.
2
Select
area on the lower right desktop screen.
The "Select Operation Mode" screen displays.
3
Select
VGX-XL2A Digital Living System
Turn Radio On
by right-clicking the red icon in the taskbar notification
All Programs > Marvell
®
Wireless Soft_g_SoftAP Configuration
Select Mode
by right-clicking the red icon in the taskbar notification
Access Point (AP)
®
Wireless SoftAP
in the Select Operation Mode screen and click OK.
and then click
Utility.
71