Sony VGX-XL2 User Guide (Computer Component) User Manual page 67

4 Click the
5 From the Preferred Networks list, select the network device you want to
confirm and then click Properties. The properties screen is displays. Confirm
the detailed information about the wireless LAN access point is correct.
To create a new connection or switch connections
You can create new location to connect to or switch connections to another
wireless LAN access point with wireless LAN while connected. For additional
information, please refer to Windows
1 Click the Windows
2 From the Control Panel, click the
Connections screen displays.
3 Right click the
Properties. The Wireless Network Connection Properties screen displays.
4 Click the
5 Click Add
displays.
Adjust the following access point settings to be used:
• Enter Network name (SSID). You can enter a maximum of 32 characters
(case-sensitive) for the Network name (SSID).
• Set
• If WPA-PSK
Key is Provided Automatically
6 Click OK. If you successfully connect to the new wireless LAN access point, a
message displays in the communication area saying you are connected.
64
Wireless Networks
Start button and then click
Wireless Network Connections
Wireless Networks
in the Preferred Networks. The Wireless Network Properties screen
Network Authentication
and WEP
tab. The list of Preferred Networks
Help
Network Connections
tab. The list of Preferred Networks
and Data Encryption.
are selected, remove the check mark by clicking
and, if necessary, enter the
Control Panel.
icon. The Network
icon and then click
Network
VGX-XL2A Digital Living System
displays.
displays.
key.