Sony VGX-XL2 User Guide (Computer Component) User Manual page 51

Align clips on both sides
of memory module.
7 Install the graphics card. Install the graphics card, connect the cable and
tighten the screw.
8 Install the upper cover. Install the cover and tighten the screws on the back.
9 Connect the power cord and the peripheral devices that were removed in Step
1 and turn on the power to this device.
10 Click the
Information
VGX-XL2A Digital Living System
Start button and then point to
and then click VAIO
Clips on both sides must
fit into the notches on
the memory module.
All Programs, VAIO
®
System Information.
®
System
48