Power/Start - Sony VGX-XL2 User Guide (Computer Component) User Manual

Power/Start

Event:
Power is not on and green power lamp is not lit.
Comment:
Confirm that the XL2A computer's power cord is inserted firmly into an outlet.
• Confirm that all of the cables are connected well.
• Remove all the cables connected to this device, and connect them again
after waiting five minutes, then turn the power on again.
• If the device does not run after doing the above, please contact VAIO
Customer Support.
Event:
The power is turned on and the power lamp (green) of theXL2A computer is
on, but there is no display on the screen.
Comment:
• Make sure the proper input for the display unit (TV, DVI-D monitor) is
selected.
• Please confirm that the display unit (TV, DVI-D monitor) power is turned
on.
If nothing is displayed on the screen after a time, please follow the procedures
below.
• Make sure the XL2A computer is connected to the proper input.
• Hold the power button of this device for at least six seconds, make sure
the power lamp turns off and then turn the power on again.
• If nothing is displayed after the above operation, hold the power button of
this device again for at least six seconds, make sure that the power lamp
turns off, then remove all cables connected to this device, and re-connect
after waiting five minutes and then turn the power on again.
154 VGX-XL2A Digital Living System