Wired Network - Sony VGX-XL2 User Guide (Computer Component) User Manual

• Verify that
• Verify that
Note: If you are using a HDMI connection through a TV or an amplifier that
supports 5.1 sound, do the following:
• check
• select
• check
6 Close the Sound Reality Control Panel and the Windows Control Panel.
Your 5.1 Surround Sound Speaker Setup is complete.
Speaker Setup Notes
• After the 5.1 channel sound is setup, sound may not be outputted through
the HDMI connection if your HDMI device does not support 5.1 channel
sound. To enable HDMI sound, uncheck the
check box and check/select the
on the Sound Reality Control Panel, Advanced tab. This will disable the
5.1 channel sound output.
• Dolby Digital 5.1 must be selected for the audio output of the DVD from the
DVD menu. Note: The VGX-XL2A does not support DTS sound decoding.
Step 4: Connecting to the Internet

Wired Network

Use an RJ-45 connector cable. Connect one end to the Ethernet connector on
the computer and the other end to your cable or DSL modem.
34
AC3 is the option selected for Format.
Enable Digital Output
Enable HDMI™ Output
AC3 for the format
Enable Digital Output
is checked in the S/PDIF group box.
Enable Dolby Digital Live
Enable HDMI Output
VGX-XL2A Digital Living System
check box located