Table of Contents
Advertisement
Nuclias Connect Hub Plus User Manual
Drag to define a zone for motion detection. Different zones can be defined with different
sensitivity (the maximum number of zones varies by camera model). To define a window-
type detection zone (cell-type zone is also supported depending on camera model):
1. Click Add. A square appears in the preview window.
2. Enter a name in the Zone Name text box for this zone.
3. Adjust the size of the square by dragging its corners. The squares can be overlapped to
accommodate irregular shapes.
4. Configure Sensitivity: 0 (not sensitive to motion) the lowest and 100 the highest. The
higher the sensitivity, the more sensitive the camera is to movements. Lower sensitivity
would require larger moving objects or bigger movements covering larger regions in the
defined zone to trigger an alert.
5. Click Save to apply your settings.
After the zones have been set, whenever there is a movement in the camera, a person with
running posture will be displayed on the live video.
Notes:
1.
To enable motion detection, at least one zone has to be set.
2.
Motion Detection is only available on cameras that support this function through
ONVIF protocol. Please refer to the camera's specifications for details.
95
Camera Surveillance
Advertisement
Table of Contents
