Table of Contents
Advertisement
Nuclias Connect Hub Plus User Manual
Neighbor AP Detection
Neighboring APs as well as wireless clients can be detected by scanning the radio
frequencies. Navigate to Configuration > Profile Settings > [Site] > [Network] > Wireless
Resource. Then click the Neighbor AP Detection tab to view the existing settings.
To view all detected APs, go to Monitor > Neighbor AP. From this page, you can see SSID,
security, and channel as well as signal strength of the AP neighborhood. This function is
useful if you want to verify the wireless coverage meets your floor plan with the information
of the neighboring APs and their signal strength. It can also help detect potentially rogue
access points in your site to prevent threats and attacks.
Click Save to save the values and update the screen.
Firmware Upgrade
The Firmware Upgrade function allows users to perform firmware upgrade. This is a useful
feature that prevents future bugs and allows for new features to be added onto your device.
Please go to your local D-Link website to see if there is a newer firmware available.
Navigate to Configuration > Firmware Upgrade and click [Site] > [Network] and configure
the following for the selected wireless network.
Online Check Upgrade
Firmware
Manual Upgrade
Firmware
Time Start
In the Run Status section, the firmware update results are displayed.
Click Apply to save the changes and for them to take effect.
The Run Status area below will display the firmware upgrade results.
On this tab, you can click Check for Update to obtain
firmware files online immediately.
On this tab, you can upload the firmware files to the firmware
list area.
Select
a desired date and time in the future to perform
firmware upgrade
or update the firmware immediately.
74
AP Network
Advertisement
Table of Contents
