Table of Contents
Advertisement
Nuclias Connect Hub Plus User Manual
4.
Connect the adapter to the power input on the DNH-200, then plug the adapter into a
nearby power outlet.
5.
Use an Ethernet cable to connect the DNH-200 with a switch or router that the
management computer is connected to.
6.
Configure the DNH-200 from a computer. Enter https://DNH-200-XXXX.local* in the
address field of your browser (*where XXXX are the last four digits of your device's MAC
address). You can find the MAC address printed on the label on the bottom of the DNH-
200).
7.
Log into the device's web interface. The default username is "admin" and password is
"admin".
8.
Configure the DNH-200 via its web interface after login.
10
Hardware Installation
Advertisement
Table of Contents
